If you use a Paychex PEO, or are about to, a workers’ comp premium audit can feel like someone else’s problem. It isn’t entirely. This guide walks you through preparing for one: who handles the audit under your arrangement, which records to gather, and how to check that your classifications and payroll are reported correctly before an auditor does it for you.
Before you start, have three things on hand: your PEO service agreement, recent payroll reports, and a list of your job roles. Nothing here is legal, tax, or insurance advice, and several rules mentioned below vary by state and carrier.
Step 1: Confirm who owns the policy and the audit under your PEO agreement
Start with one question: is your company covered under the PEO’s master policy, or does it hold its own client-specific policy? The answer determines whose policy the carrier audits and who gets contacted. Find it in the workers’ compensation and responsibilities sections of your Paychex service agreement, not in notes from a sales call. Coverage structure can also differ by state, so confirm it for the states where you have employees.
Next, get clear on co-employment. In plain terms: the PEO and your business share certain employer responsibilities, but your operations, job duties, and safety conditions remain yours. An auditor’s questions are about what your employees actually do and what they were paid, and only you can document that.
The most common mistake is reading “the PEO handles it” as “I have nothing to do.” Paychex may coordinate the audit, but the underlying facts come from your records.
Send your Paychex representative a written request asking:
- What does the audit process look like for a client in my situation?
- Who is my contact, and who will the auditor contact?
- What documents or information must I supply, and by when?
Keep the reply. Don’t assume specifics about Paychex’s process from general PEO practice or from anything you read online, including here. If you want to compare against Paychex’s own description of its workers’ comp program, use its current published materials on paychex.com and note the date you viewed them, since program details change.
Step 2: Learn what a payroll audit actually checks
A workers’ comp premium audit compares the payroll and job classifications used to price your coverage against what actually happened during the policy period. Premium is estimated up front, then trued up afterward. That means an audit can produce additional premium or a return premium. It isn’t automatically bad news.
Auditors generally focus on three areas:
- Payroll totals by class code. A class code is the numeric category that describes the type of work, and each carries its own rate.
- Independent contractors and subcontractors. How you treated them, and whether they carried their own coverage.
- Employee-to-class assignments. Whether each person sits in the code that matches their real work.
The payroll being counted is called remuneration, and what it includes varies. Some pay types, such as certain overtime premiums, may be excluded or treated differently depending on the state and the rating bureau. Look up the rules for each state where you have employees instead of assuming one national standard.
Timing and scope also need verifying. Under a PEO, how often audits happen and how they are conducted depend on the carrier and the PEO’s program. Don’t assume an annual audit on a fixed calendar. Ask Paychex when the current policy period ends, when audit activity typically starts after that, and whether it is done by phone, by mail, or on site. Put the dates on your calendar so your records are ready before the request arrives, not after.
Step 3: Build your job-role map and check each class code
Create a simple table with one row per role and four columns:
- Role (and how many people hold it)
- Actual day-to-day duties
- Where the work is performed (office, warehouse, job site, vehicle, remote)
- The class code currently assigned
Then compare each row with the code descriptions published by the relevant rating bureau. Most states use the National Council on Compensation Insurance (NCCI), while some states run their own independent bureaus with their own manuals. Check which applies to you, and read the scope notes in the code description, not just its title.
The classic mistake is assigning a code by job title rather than by duties. “Office manager” sounds like clerical work, but if that person spends part of the week on the warehouse floor, the classification question gets harder. Bureau rules often have specific provisions for mixed-duty employees and for clerical exceptions, and they generally require the clerical work to be genuinely separate. Whatever code you land on for mixed roles, write down the basis: time split, physical separation of work areas, supervisor statements, written job descriptions.
If your roles are concentrated in field trades, it can help to see how PEO workers’ comp for construction frames classification, since mixed field and office duties are a common audit trouble spot there.
Once your map is done, ask Paychex to share the class codes and payroll assigned to your worksite, then lay them next to your table. Look for:
- Roles assigned to a code that doesn’t match their duties
- Employees missing from, or extra to, the reported list
- Locations or states with an unexpected code
Flag mismatches to Paychex in writing now. Fixing a classification before the audit is far easier than disputing it afterward.
Step 4: Reconcile payroll records with what was reported
Pull the payroll registers for the full policy period and total them by class code. Tie those totals to the figures reported through Paychex. Differences are not necessarily errors, but each one needs an explanation.
While reconciling, look specifically for:
- Terminated employees who still appear in, or are missing from, a class code
- Mid-year role changes where the employee’s pay should move between codes
- Bonuses and commissions that were included for some people and left out for others
As a sanity check, compare your totals with your quarterly state wage filings and your Form 941 figures. They won’t match the workers’ comp base exactly, and they shouldn’t be expected to. Gaps should be explainable by things like excluded pay types, officer payroll limits, or differences in how the periods line up. If you can’t account for a difference, investigate before the auditor asks about it.
Decide how owners and officers are handled. Whether they are included or can be excluded, and what payroll limits or minimums apply, varies by state. Confirm the local rule, check how Paychex has treated your officers, and keep any exclusion paperwork that applies. Don’t copy what another business or another state does.
When you finish, write a one-page reconciliation note listing each total, its source, and any explained variance. If an auditor questions a figure, this note saves hours.
Step 5: Document contractors, subcontractors, and certificates of insurance
In many cases, auditors add payments to uninsured subcontractors to your payroll base, which can raise the audited premium. How this works depends on the state and the carrier, so check the rules that apply to you. The practical defense is paperwork. Businesses that rely heavily on subs, such as electrical contractors and roofing companies, tend to see this issue come up most often.
Collect a certificate of insurance (COI) for every subcontractor you paid during the policy period, and make sure each covers the dates of the work. A COI from last year doesn’t help with this year’s payments. Set a reminder for expirations and request renewals as they come due, not once an audit is announced.
Keep supporting records for each relationship:
- Signed contracts or statements of work
- Invoices from the contractor’s business
- Form 1099 records and payment history
- Evidence they serve other clients or use their own tools
Then sort your contractors into two groups. True outside vendors operate independently: they set their own methods and hours and bill you for a result. Contractors who work under your direction, on your schedule, doing the same work as employees, are a different matter. Tests for worker classification differ by state and by agency, and an auditor may reach a different conclusion than you did.
If you have people in that second group, treat it as a misclassification risk worth raising with employment counsel before the audit, not during it. This guide can’t tell you how a given arrangement would be classified, and neither can your PEO representative.
Step 6: Prepare for the auditor contact and the review
Agree with Paychex on the logistics: who schedules the audit, who attends, and whether it will happen by phone, mail, or on site. Get the answers in writing. Unless you’ve verified it from a current Paychex source, don’t present its process as fact to your team.
Next, assemble one binder or shared folder containing:
- Payroll registers for the policy period and your reconciliation note
- The job-role map from Step 3
- Contractor files and current COIs
- Written job or duty descriptions, plus any safety documentation that supports a lower-risk classification
Name one point person who knows where everything is and can answer questions about operations. Make sure they know who at Paychex to loop in.
During the review, a few habits help:
- Answer what is asked, accurately and concisely. Volunteering speculation creates problems.
- If you don’t know, say so and follow up with the documented answer. Don’t guess.
- Keep notes on the questions asked and the documents shared.
- Write down every classification the auditor proposes to change, along with the reason given.
That last note matters most. You’ll compare it against the final audit statement, and it tells you which items to challenge if the paperwork doesn’t match what was discussed.
Step 7: Review the audit results and dispute errors
When the final audit statement arrives, go through it line by line: class codes, payroll amounts by code, and any additional or return premium. Compare each against your job-role map from Step 3 and your reconciliation from Step 4. Check also that the proposed changes you noted during the review actually appear, and that nothing new has been added.
If something looks wrong, ask Paychex promptly to request the correction. Time limits for disputes and appeals vary by carrier and state, so ask right away what the path and deadlines are rather than waiting to see whether the issue resolves itself. Send your evidence with the request, and keep every communication in writing, including summaries of calls.
Also find out how adjustments flow through your PEO billing. Whether an additional premium is passed through, how a return premium is credited, and when each shows up on an invoice depend on how your PEO’s pricing is structured. Don’t assume. Look in your service agreement, and if it’s unclear, ask Paychex to explain it in writing and add that explanation to your file.
Finally, treat the audit as feedback. Any classification or payroll error found is a gap in your process. Fix it at the source so it doesn’t recur at the next audit.
After the audit: keep the map current and revisit terms at renewal
Update your job-role map every quarter, adding new roles, noting duty changes, and refreshing contractor COIs. An audit goes much more smoothly when the work was done during the year. At renewal, reread the workers’ comp terms in your PEO agreement, including how audits and adjustments are handled.
If you want to see how other providers handle audits and pricing, PEOMetrics offers an unbiased side-by-side comparison. PEOMetrics may receive placement fees from vendors.
Before you sign that PEO renewal, make sure you’re not leaving money on the table.
Many businesses unknowingly overpay because of bundled fees, hidden administrative markups, and contracts designed to limit flexibility. We give you a clear, side-by-side breakdown of pricing, services, and contract terms, so you can see exactly what you’re paying for and choose the option that truly fits your business.